Repairing refractory mastic ROM-100

Repairing refractory mastic AVNG ROM-100 is an effective refractory composition designed for the fabrications of launders and the joining, bedding and patching of precast refractory shapes

The mastic is applied by hand, either with a syringe to seal the joints, or with a spatula and dries to a strong, hard and erosion resistant surface.

Contact the sales department by phone: +7 343 346-27-27
E-mail: order@avng.tech

Сall you back?

Main advantages

non-wetting by aluminium alloys, magnesium and zinc
easy to apply and high surface quality after final processing
low shrink coefficient reduces the chance of metal penetration
strong adhesion to all standard refractories

Application

the mastic must be applied to a clean from dust and oil surface
the material is applied by hand, either with a syringe to close the joints or with a spatula
temperature of the surface during the application should be between 15 - 35 °C
maximum thickness - 50 mm
directly after application the mastic should be dried by gas flame heating for 8 hours for every 25 mm of thickness, or in an oven at a temperature of 150 to 175 °C for 8 hours for every 25 mm of thickness
all microcracks should be filled with mastic after drying
the pail should be closed tightly to prevent drying out and loss of elasticity

Package

5/10/20 kg plastic pails

Storage & safety
Store in a dry place at a temperature not lower than + 5 °C, do not freeze. The minimum shelf life under proper conditions and unopened original packaging - 12 months

Applications

Company

Foundry production

Metal processing by pressure

23, Tkachey Str., office 1223 Yekaterinburg, Russia

order@avng.tech

Privacy Policy

2023 Avangard Group

Site made - SiteDirect

RU