Boron nitride coating ZPB-300
AVNG ZPB-300 is an inorganic boron nitride based coating which provides an outstanding protection, release (non-stick) and lubrication performance while high-temperature processes
The coating is suitable for brushing and spraying. For the best results and to avoid cracks the coating can be diluted with water till proper consistency.
The coating is non-wetted and inert to most of molten metals, slags and drosses (aluminum, magnesium, zinc, etc.); can be applied at high temperatures – up 900 °C in air, 1400 °C in reducing atmosphere; perfectly suited for aluminum, magnesium and zinc casting process - protective covering of all liquid metal transfer system components: launders, runners, filter bowls, boxes, caster tips, drosspress heads, etc.
The coating is suitable for brushing and spraying. For the best results and to avoid cracks the coating can be diluted with water till proper consistency.
The coating is non-wetted and inert to most of molten metals, slags and drosses (aluminum, magnesium, zinc, etc.); can be applied at high temperatures – up 900 °C in air, 1400 °C in reducing atmosphere; perfectly suited for aluminum, magnesium and zinc casting process - protective covering of all liquid metal transfer system components: launders, runners, filter bowls, boxes, caster tips, drosspress heads, etc.
Main advantages
- excellent release and lubrication properties
- reduce corrosion and wear of graphite and non-oxide refractory parts and tools increasing lifetime
- inorganic binder improves adhesion
- coating durability shortens downtimes
- safety and cleanliness of operation area: no open flames and gases in comparison with more traditional release agents such as oils, greases, etc.
- economical consumption
- easy to process
Application
- AVNG ZPB-300 coatings can be applied by brushing, rolling, or spraying.
- smooth and dense materials are best coated by spraying. Porous surfaces such as refractories are best coated by brushing or spraying
- coating should be stirred properly before use
- for the best results and to avoid cracks the coating can be diluted with demineralized water till proper consistency in the following(coating:water) ratio: 1:1 – 1:5.
- coating should be applied on clean, dust and oil free surfaces
- to prevent cracks formation, it is to apply in thin and covering layers to ensure good surface adhesion
- spraying/brushing on warm surfaces (below 100 °C) improves the result and shortens drying time
- re-coat if required to achieve proper coverage
- coating has to be fully dried prior use
- brushes and tools can be cleaned with water
Package
5/10/20 kg PE-bucketsStorage & safety
Store in dry conditions, avoid frost. Minimum shelf life 12 months if stored in original packaging and appropriate conditions.
Store in dry conditions, avoid frost. Minimum shelf life 12 months if stored in original packaging and appropriate conditions.
Applications
Company
23, Tkachey Str., office 1223 Yekaterinburg, Russia
2023 Avangard Group
Do you want to know the cost?
Fill out the form and we will call you back
By clicking on the "Submit Application" button, you automatically agree to the storage and processing of your personal data in accordance with the Privacy Policy